HoopWise Embroidery and sewing machines, thread, and supplies made clear
Software & Files

What Is a DST File? Embroidery Formats PES, JEF, VP3

What a DST file is, which embroidery format each machine brand reads (PES, JEF, EXP, VP3, XXX), what each stores, and how to convert files safely.

What Is a DST File? Embroidery Formats PES, JEF, VP3
The short answer A DST file is Tajima's machine embroidery format: a list of needle moves, jumps and color changes with no thread colors, no thumbnail and no editable shapes. Almost every machine reads it. Your machine's native format (PES for Brother and Baby Lock, JEF for Janome, VP3 for Husqvarna Viking and Pfaff) keeps colors as well.

An embroidery file is not a picture. It is a set of instructions for where the needle goes, when to jump, when to trim and when to stop for the next color. That is why a design bought online comes as a zip of ten different extensions, and why opening the wrong one gives you a machine that refuses the file or stitches a rainbow you did not ask for.

What is a DST file?

A DST file is a machine embroidery format created by Tajima (the name stands for Data Stitch Tajima). It stores each stitch as a 3-byte record of X and Y movement plus control codes for jumps, color changes and the end of the design, behind a 512-byte header. The header holds an 8-character design label, the stitch count, the number of color changes and the design’s extents. According to the published specification, a single DST stitch or jump can be at most 12.1 mm long.

What a DST file does not store matters just as much: no thread colors, no thumbnail and no vector shapes. Because it is so simple, commercial multi-needle machines and most home machines can read it, and nearly every design seller includes a DST.

Which embroidery format does my machine read?

Your machine reads its own brand’s native format first, and most also accept DST. The table lists the formats that design sellers usually ship. Native formats come from published format documentation (EduTech Wiki’s embroidery format pages); always confirm in the “embroidery data” or “USB media” section of your own manual.

ExtensionBrand it belongs toWhat the file stores about color and layout
.PESBrother, Baby LockA PEC stitch block plus design data; versions 1 to 4 use Brother’s 64-color palette, versions 5 and 6 add RGB colors, thread brand and catalog number
.PECBrother, Baby LockThe stitch-only part of a PES, colors as palette numbers
.DSTTajima, most commercial machinesNo colors, no thumbnail, no shapes; the universal fallback
.EXPMelco, BerninaNo header at all, stitches and color stops only
.JEFJanomeJanome palette colors, plus which hoop the design was laid out for
.VP3Pfaff, Husqvarna VikingRGB colors with thread brand, catalog number and color description
.HUSHusqvarna VikingOlder Viking stitch format
.VIPPfaff (older), HusqvarnaOlder Pfaff and Viking stitch format
.XXXSinger, CompuconSinger home-machine format
.SEWJanome, Elna, KenmoreOlder Janome-family format

When your own format is missing from a download, Embroidery Library’s advice is to transfer the DST version (for Brother, Baby Lock, Husqvarna Viking, Janome and Pfaff machines) or the EXP version (for Bernina).

Why does my DST design stitch in the wrong colors?

A DST design shows the wrong colors because the file contains no colors to show. It only marks the places where the machine should stop for a thread change, so the machine fills in its own default colors on screen. The real colors live in the design’s color sheet, usually a PDF or text file in the same download, listing each stop with a thread brand and number. Thread to that list, not to the screen. If the sheet names a brand you do not own (Isacord or Madeira when your stash is Brother, for example), our thread color converter finds the closest match in your brand and shows how close it is.

What is the difference between a stitch file and a working file?

A stitch file (DST, EXP, PEC, JEF) is a finished list of needle positions; a working file keeps the shapes, fills and lettering that produced those stitches so they can be edited properly. Hatch uses .EMB, Embrilliance uses .BE, and newer PES versions carry some object data that Brother’s PE-Design can reopen. Edit a working file and the software recalculates stitches; edit a stitch file and you are moving thousands of individual points. Buy or keep the working file whenever a seller offers it. Our embroidery software comparison shows which programs open which working formats.

How do you convert a DST file to PES or another format?

Convert by opening the file in embroidery software and saving it in the target format; renaming the extension never works. The free route is Ink/Stitch, an open-source extension for the free Inkscape editor on Windows, Mac and Linux, which reads DST, PES, JEF, EXP, VP3, XXX, HUS and dozens more, and writes DST, EXP, JEF, PEC, PES, VP3, XXX and others. Paid programs such as Hatch, Embrilliance and Brother’s PE-Design do the same with more editing tools.

Conversion is never perfectly lossless. The pyembroidery library, which Ink/Stitch uses for file input and output, states plainly that reading and writing embroidery files is always lossy: trims may become jumps, colors may be invented for formats that need them, and DST has no colors to pass on. After converting, check the stitch count and size against the original, then stitch a test on scrap.

Why does resizing a stitch file ruin the design?

Resizing a stitch file goes wrong because the stitch count stays the same while the area changes. Shrink a design 30 percent and the same number of stitches is packed into about half the area, which makes it stiff, bulletproof and prone to thread breaks. Enlarge it and the stitches spread out, leaving gaps and loose satin columns. A common rule of thumb among embroiderers is to stay within about 10 to 20 percent when scaling a stitch file. For bigger changes, use software that recalculates stitches (object-based resizing) from a working file, or buy the design in the size you need. Design sellers usually offer several sizes for exactly this reason.

Does the file have to fit my hoop?

Yes. The design’s stitch area has to fit inside your machine’s maximum embroidery field, not just the outer hoop. A 4x4 in field is 100 x 100 mm and a 5x7 in field is 130 x 180 mm. Machines read the design’s extents and will refuse, or ask you to rotate, a design that is too large. On a Brother machine, that is the most common reason a PES file “will not load” from USB. Designs for a multi-needle machine are often digitized for large fields and DST, so check the size before buying for a home machine.

How do you get the file onto the machine?

Most home machines take designs by USB flash drive, by USB cable from a computer, or wirelessly on newer models. Brother’s PE800 has a USB port for flash drives; the entry PE535 connects to a computer by USB cable, which Brother lists as not included. Unzip the download on the computer first and copy only your machine’s format (or the DST) to the drive. Keep file and folder names short and check your manual for how the machine browses folders, because older screens show little of a long name.

Who is this page not for?

This page is for people using existing designs, bought or downloaded free. It does not teach digitizing (turning artwork into stitches), which is a skill and a software decision covered in our embroidery software comparison. It also does not cover hand-embroidery patterns, which are images, not machine files, or commercial multi-head production systems with their own networked formats.

Where do these format details come from?

The format facts on this page come from the EduTech Wiki embroidery format pages hosted by the University of Geneva (DST, PES, EXP, JEF and VP3 specifications), the pyembroidery project README on GitHub, Ink/Stitch’s published list of supported file formats, Embroidery Library’s help page on file formats, and Brother USA’s PE535 and PE800 product pages, all checked October 6, 2026.

Frequently asked questions

Quick answers to what readers ask us most

Can a Brother embroidery machine read DST files?

Many can. Embroidery Library tells Brother, Baby Lock, Husqvarna Viking, Janome and Pfaff owners to try the DST version when their own format is missing. The machine will assign its own default colors, so keep the design's color sheet. Check your manual's embroidery data section to confirm.

Why does my DST file show the wrong colors?

Because DST stores no colors at all, only the points where the machine should stop for a color change. The screen shows placeholder colors. Use the color list that came with the design and thread the colors yourself.

Is converting an embroidery file safe?

Converting between stitch formats usually works but is never perfectly lossless; the pyembroidery project states that reading and writing embroidery files is always lossy. Trims, color data and hoop information can change. Stitch a test on scrap fabric before a real garment.

What is the difference between PES and PEC?

PEC is the stitch block a Brother machine actually sews. A PES file contains a PEC block plus extra design data; newer PES versions add RGB thread colors, thread brand and catalog numbers, and higher-level objects that Brother's software can edit.

Can I make an embroidery file from a JPG or PNG?

Not by renaming or converting it. An image has to be digitized into stitches in embroidery software, by hand or with an auto-digitizing tool. Our software comparison covers which programs can do it.